Industry News
Class
-
- MIG Welding Technology: A Key Tool in Modern Industrial Manufacturing
- In today's industrial manufacturing sector, welding technology, as a critical process for joining metal materials, directly impacts product quality and production efficiency. Among various welding techniques, MIG welding (Metal Inert Gas Welding) has emerged as a core technology in numerous industries such as automotive manufacturing, aerospace, and marine engineering, thanks to its efficiency, stability, and strong adaptability.
2025-04-27 -
- Soft Starters: An In-Depth Analysis
- Abstract: This article delves into the intricacies of soft starters, exploring their definition, working principles, various starting methods, advantages over traditional starting techniques, and extensive applications across industries. It aims to provide a comprehensive understanding of soft starters and their significance in modern motor control systems.
2025-03-04 -
- How To Install And Maintain Welding Machine?
- The welder must be properly grounded before use to protect personal safety. Before using the welding machine, 500V megohmmeter must be used to test the insulation resistance between the high voltage side of the welding machine and the case is not less than 2.5 MΩ. The power supply must be turned off for maintenance before it can be checked out of the box. After the welder passes the water, it is welded and it is forbidden to work without water. The cooling water should be guaranteed to supply industrial water at 5-30°C under a water inlet pressure of 0.15--0.2MPa. After the winter welding machine is working, apply compressed air to blow the water in the pipeline to avoid freezing the water pipe.
2018-06-18 -
- How To Use Welding Machine?
- Spot welding machine use method: 1. When welding, adjust the position of the electrode rod so that when the electrode is just pressed to the weldment, the electrode arms are kept parallel to each other.
2018-06-17 -
- What Is The Working Principle Of Welding Machine?
- The process of spot welding is to open the cooling water; the surface of the weldment is cleaned, and the assembly is accurately carried into the space between the upper and lower electrodes, and the pressure is applied to make the contact well; when the power is applied, the contact surfaces of the two workpieces are heated and partially melted. Nugget; maintain pressure after power off, so that the nugget cooling solidified under pressure to form solder joints; remove the pressure, remove the workpiece. Spot welding parameters such as welding current, electrode pressure, energization time and electrode working surface size have great influence on welding quality.
2018-06-12 -
- What are the characteristics of MIG welding machine?
- 1. Like TIG welding, it can weld almost all metals, especially for welding aluminum and aluminum alloys, copper and copper alloys, and stainless steel. Almost no oxidation burns in the welding process, only a small amount of evaporation loss, the metallurgical process is relatively simple.
2018-06-12
+86 13564535011
企业邮箱 : alansunrise@sina.com
公司地址 : No.723, Shangcheng Road No.800 Shanghai, China
